mechanical schematic 13200 estrella ave., bldg. b gardena, ca 90248 tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com transformer for rs-485 / rs-232 interface m6201 electrical specification @ 25 o c part no. m6201- l (1-4) (h) min turns ratio (1-4 : 8-5) 5% et (1-4) vsec min dcr (1-4) (?) max l l (1-4) (h) max c ww (1-4 to 8-5) (pf) max hipot (1-4 to 8-5) v rms 21 500 2ct : 1ct 18 1.50 1.50 45 4500 83 500 2.67ct : 1ct 18 1.50 2.00 45 4500 43 500 1.33ct: 1ct 11 1.00 1.20 45 4500 34 500 1ct : 1.33ct 11 1.00 1.20 45 4500 11 500 1ct: 1ct 11 1.00 1.00 45 4500 13 500 1ct: 2ct 11 1.00 1.20 45 4500 38 500 1ct: 2.67ct 11 1.00 2.00 45 4500 product performance is limited to specifed parameters. data is subject to change without prior notice. dimensions unless otherwise specifed, all tolerances are: inch: .xx : 0.015 .xxx : 0.004 mm: x,x : 0,38 x,xx : 0,10 ? designed for use with the maxim? max253 and max845 monolithic oscillator/power driver 3.3v / 5.0v source ? construction complies with iec 60950 basic, supplementary and reinforced isolation requirements ? ul60601 and vde requirement design subject to request ? operating temperature: -40c to +85c ? smaller package with 500v rms isolation low cost version available upon request note: ? primary: connect 1-2 and 3-4 in series ? secondary: connect 8-7and 6-5 in series ? ocl, l l , c ww measured at 100khz, 0.1v rms
|